Seminarios de ECoMMFiT

Los seminarios de ECoMMFiT se llevan a cabo dos veces al mes para discutir en eneroal sobre el amplio abanico de trabajo de investigación en fluidos que se llevan a cabo dentro y fuera del grupo. Es una gran oportunidad para nuestra comunidad (estudiantes, postdocs y miembros de la Escuela) así como para los visitantes para unir y compartir pensamientos sobre la investigación en un contexto informal. A menos que se indique lo contrario, los seminarios se llevan a cabo los viernes de 10h a 11h en el laboratorio 111 del Departamento de Ingeniería Mecánica.
Si deseas participar, estaremos encantados de contar contigo para dar un seminario y conocer nuestra comunidad. Por favor, no dudes en contactar con nosotros mediante este correo electrónico.

NOTA: la convocatoria de seminario se realiza a través de correo electrónico. Si desea ser incluido en nuestra lista de distribución, hay que enviar una petición a Lluís Vázquez.

2023/2024

  • Machine Learning - Enhanced Predictive Modeling for Air Quality Assessment in Madrid, Koorosh Kazemi, URV, March 15th.
  • Experimental and numerical study of sediment scour under impinging vertical jet, Mariana Mendina Universidad de la República, Uruguay, January 26th.
  • Numerical modeling of high aspect ratio fibers in fluid flows, Mohammadjavad Norouzi, URV, January 12th - video.
  • Analysis of the Effects of Severe Weather with the COAWST Model Comparing Coupled and Decoupled Simulations, as well as Using Machine Learning Algorithms to Predict the Impact on Populations, Jordi Iglesias Deutú, URV, December 1st.
  • Numerical simulations of particle turbulent dispersion and deposition with implications for the spreading of airborne diseases, Akim Lavrinenko, URV, November 10th.

2022/2023

  • Rheological study of micro-droplet formation in co-flow capillary device, Farnoosh Hormohzinezhad, URV, July 21st - video.
  • Biomass Pyrolysis for Value-Added Products, Dra. Silvana Tourn, Universidad Tecnológica Nacional, June 23rd.
  • An overview of the current efforts on Machine Learning and Data Science front, Dr. Alexandre Fabregat, URV, June 2nd - video.
  • Numerical investigation of a single bubble and a pair of bubbles rising in Newtonian and non-Newtonian fluids with interfacial passive scalar transfer, Koorosh Kazemi, URV, May 5th.
  • Use of machine learning to predict severe weather impact, Jordi Iglesias, URV, April 14th - video.
  • Numerical study of cerebral aneurysms using different rheological models with diverse pathologies, Nicolás Catalán, URV, March 31st - video.
  • Horizontal gas-liquid two-phase flow: The importance of sub-regimes subdivision, Dr. Abderraouf Arabi, URV, March 10th.
  • Applications of machine learning to identify drivers of Phytophthora infestans population diversity, Dr. Araceli Torró, Fundació URV, February 24th.
  • Fully-resolved numerical simulations of the turbulent flow, particle deposition and dispersion in cubical cavity with two pairs of differentially heated opposed walls at Ra = 3.6 x 109, Akim Lavrinenko, URV, February 10th.
  • Evaluation of models based on artificial intelligence for the spatial prediction of forest fire risk, Fidel Bonet, Ematsa/URV, January 23rd.

2021/2022

  • Tornado resilience: 21st Century Design and Equity Challenge, Dr. David Prevatt, University of Florida, July 20th.
  • Use of Machine Learning to continuously monitor the evolution of ventilated critical COVID-19 patients and to identify aggravating events, Dr. Josep Anton Ferré, URV, 10 de diciembre.
  • Study of coupling the atmosphere wave and ocean modeling (COAWST) during Gloria storm, Jordi Iglesias Deutú, URV, 19 de noviembre.
  • Numerical simulation of two-phase liquid-liquid and three-phase gas-liquid-liquid flows in horizontal pipes, Ronaldo Luis Höhn, URV, 29 de octubre.
  • Study of rheological and mechanical properties of a thermoplastic polymer, Farnoosh Hormozinezhad, URV, 15 de octubre.
  • Coupled CFD-PBM simulation of two- and three-phase systems, Francesco Maniscalco, Politecnico di Torino, 1 de octubre.

2020/2021

  • Local radial point interpolation cumulant Lattice Boltzmann Method, Mohsen GorakiFard, Ecommfit, URV, 14 de mayo.
  • Using Machine Learning to estimate the Impact of Ports and Cruise ship traffic on urban air quality: the case of Barcelona, Àlex Fabregat, Ecommfit, URV, 18 de diciembre. Puedes verlos aquí: 1a parte, 2a parte, 3a parte, 4a parte.
  • CFD Modeling of Multi-phase Turbulent Flows in a Bubble Column Reactor, Mojtaba Goraki Fard, Ecommfit, URV, 4 de diciembre. Puedes verlos aquí: 1a parte, 2a parte, 3a parte.
  • Investigation of the hydrodynamic characteristics of small-size autonomous vehicle, Akim Lavrinenko, Ecommfit, URV, 20 de noviembre. Puedes verlo aquí: 1a parte, 2a parte.
  • Numerical Simulation of Inter Facial Transport Phenomenon of Bubbles Immersed on Non-Newtonian Fluids, Koorosh Kazemi, Ecommfit, URV, 23 de octubre. Puedes verlo aquí: 1a parte, 2a parte.
  • Image processing for determining droplet size distribution, Paolo Sassi, Ecommfit, URV, 9 de octubre. Puedes verlo aquí.
  • Analysis and flow comparison of airflow in Palau Güell's chimneys, Jordi Iglesias, Ecommfit, URV, 25 de septiembre.

2019/2020

  • 28 de febrero de 2020, Numerical Tool for Pollution Dispersion Simulations, Gonzalo Fernández, Ecommfit, URV.
  • 14 de febrero de 2020, Prediction of particle deposition in enclosed turbulent natural convection flows using mixed convection boundary layer approximations: A first step to find quick answers to questions such as "When do we have to clean art works inside display cases?", Jordi Pallarès, Ecommfit, URV.
  • 31 de enero de 2020, Numerical simulation of particle advection and deposition in enclosed turbulent flows driven by natural convection, Alexandre Fabregat, Ecommfit, URV.

2018/2019

  • 26 de abril de 2019, Particle tracking in coastal waters with application to plastic pollution, José M. Alsina, Laboratory of Maritime Engineering, UPC.
  • 14 de diciembre de 2018, Jet flow control applied to a projectile, Mohsen Goraki Fard, URV.
  • 15 de noviembre de 2018, Numerical and experimental analysis in a cylindrical cavity with a rotating lid, Joshua David Selvaraj, URV.
  • 20 d'octubre de 2018, Flow control using local unsteady heating, Rafael Jurado Cruz, URV.

2017/2018

  • 13 de julio de 2018, 3D Numerical study of flow regime within bubble column reactor (BCR), Mojtaba Goraki Fard, URV.
  • 29 de junio de 2018, Magnetohydrodinamics for fusion nuclear reactor cooling, Daniel Suárez, Tecnatom.
  • 15 de junio de 2018, Numerical & experimental study of flow in cylindrical cavity, Joshua David Selvaraj, URV.
  • 1 de junio de 2018, Effect of free surface on a flat plate translating normal to the flow, Sukruth Satheesh, URV.
  • 18 de mayo de 2018, Tribological and mechanical characterization of copper-alloy/diamond composites for the use in glass molding industry, Mohammadjavad Norouzi, URV.
  • 11 de mayo de 2018, Numerical simulation of non-premixed laminar flame behavior with electric fields and buoyancy, Claudia López, Irvine University, California, USA.
  • 4 de mayo de 2018, Models numèrics: de la dinàmica de fluids a l'energia, Jordi Solé, Institut de Ciències del Mar, Barcelona.
  • 27 d'abril de 2018, Fluid structure interaction simulations involving free surface, Héctor Díaz, URV.
  • 16 de marzo de 2018, Numerical simulation of atmospheric pollutants dispersion in an urban environment, Gonzalo Fernández, Universidad de la República, Uruguay.
  • 2 de marzo de 2018, Meshless Methods for Heat conduction simulation, Javier Neira, URV.
  • 2 de febrero de 2018, Particle dispersion in a double-diffusive turbulent layer, Jordi Pallarès, URV.
  • 15 de diciembre de 2017, Dynamics and efficiency of two flapping foils in a quiescent fluid, Francesc Huera, URV.
  • 1 de diciembre de 2017, A coupled Discrete Element and Finite Volume Methods for the simulation of elastic bodies, Paolo Sassi, URV.
  • 10 de noviembre de 2017, CFD case studies and code development, Ferran Gisbert, ITP.
  • 3 de noviembre de 2017, Simulation of wind farms operation using CFD and Actuator Line Model, Andrés Guggeri, Universidad de la República, Uruguay.
  • 20 d'octubre de 2017, Numerical Simulations of Droplet Breakup in Homogeneous Isotropic Turbulence, Àlex Fabregat, URV.

2016/2017

  • 30 de junio de 2017, A dinamica de N-corpos sobre superfícies, as leis de Maxwell & os axiomas da Mecanica, Stefanella Boatto, Instituto de Matemática, Universidade Federal do Rio de Janeiro.
  • 16 de junio de 2017, Numerical modeling of ferrous iron oxidation in a split-rectangular airlift reactor, Youssef Stiriba, ECoMMFiT - URV.
  • 2 de junio de 2017, Energy-conserving algorithm for molecular dynamics simulations, Clara Salueña, ECoMMFiT - URV.
  • 19 de mayo de 2017, The Bénard-Marangoni instability, phase transition in capillary driven thermal convection, Clément Haeck, LIFE - URV.
  • 5 de mayo de 2017, On the impact of reboosting manouvers in DCMIX1 experiments: Pure molecular diffusion of ternary liquid systems, Rafael Jurado Cruz, Área Física Aplicada del Departamento de Química Física e Inorgánica - URV.
  • 31 de marzo de 2017, CFD Simulation of the Effect of Coalescence Behavior of Liquid on Bubble Column Hydrodynamics, Mojtaba Goraki Fard, ECoMMFiT - URV.
  • 17 de marzo de 2017, Sensitivity of Vortex-Induced Vibrations to localized perturbations in the wake, Dr. Francisco Huera, LIFE - URV.
  • 3 de marzo de 2017, Particle dispersion on a circular shear layer, Dr. Jordi Pallarès, ECoMMFiT - URV.
  • 3 de febrero de 2017, On the route to turbulence, Dr. Sebastian Altmeyer, IST, Institute of Science and Technology, Austria.
  • 11 de noviembre de 2016, Simulación Numérica Multidinámica, Dr. Gabriel Usera, IMFIA/Facultad de Ingeniería, Universidad de la República, Uruguay.
  • 28 d'octubre de 2016, Hydrodynamic Modeling of Granular Materials, Ms. Lídia Almazán, Friedrich-Alexander Universität, Erlangen-Nürnberg.
  • 14 d'octubre de 2016, Clustering of long flexible fibers in two-dimensional flow fields for different Stokes numbers, Dr. Manuel Martínez, ECoMMFiT - URV.
  • 30 de septiembre de 2016, Drag reduction and wake control using optimised base cavities, Dr. Jose Ignacio Jiménez. Universidad de Jaén.
  • 16 de septiembre de 2016, Review of Boundary Conditions and Investigation Towards the Development of a Growth Model: a Lattice Boltzmann Method Approach, Mr. Albert Puig, ECoMMFiT - URV.
[hacia arriba]